Performance Beyond Perfection
- Tremendous energy density
- Latest Expander Tubular Plate technology
- Extended battery life
- 6* Month Warranty
- Splillage Proof
- High cold cranking strength
Performance Beyond Perfection
- Tremendous energy density
- Latest Expander Tubular Plate technology
- Extended battery life
- 6* Month Warranty
- Splillage Proof
- High cold cranking strength
e-Rickshaw Batteries
HFE12506T+
Previous
Next
- Tubular positive plate ensuring longer life over flat plate battery in deep discharge application.
- Highly puncture-resistant separators.
- Special alloy to eliminate antimony-poisoning resistance to avoid excessive water loss after a certain service life.
- Special paste recipe (expander carbon combination) to reduce charging time.
- Factory Charged & ready to fit / use.
- Minimal Self-discharge rate for longer shelf life.
- Higher Cold Cranking Strength.
- Vibration resistant robust design.
- I-CAT Approved.
- Meets the complete I-CAT approved e-rickshaw requirements.
- High charge retention & ability to perform well in PSoC conditions.
- Unprecedented performance, even in the most demanding conditions.
- Offers up to 2x the cycle life of a standard flat plate battery.
- High density plate oxide for maximum power-per-gram and dependable ‘high cycling’ service.
- 3.5% antimony terminal Lead and large through-partition connections, increases power output; increases durability, vibration resistance and longer your battery life.
- Complete ease and convenience of your journey on the road, our e-rickshaw batteries are reliable and long-lasting.
- High-density negative plate’s paste maximizes performance and optimizes your battery life.
- Enhanced life special alloy optimizes cycle life and maximizes performance of your battery.
- Special lead alloy positive grid maximizes conductivity and allows for low resistance.
- Robust Envelope Separator with puncture-resistant ribbed back, allows for optimum acid circulation and helps prevent shorts. Maximum acid circulation, helps the battery to remain cool, and extend battery life.
- Vent cap design that resists acid leakage.
- Precision manufactured ribbed case that is 100% Air pressure tested, helps avoid future leaks and adds strength and rigidity.
| Capacity: | 125Ah @ C20 |
| Technology: | Expander Tubular Plate |
| Supported: | E-Rickshaw |
| Nominal Voltage: | 12V |
| Dimension: | Length - 425mm |
| Width - 180mm | |
| Height - 300mm |
| Warranty (in months)* - Inclusive of Prorata | 06* months |
|---|---|
₹ 9900 ₹ 7920/-
inclusive of all taxes (20% discount)
Supported:
| 350 Classic, Fortytwo, NINJA 300, NINJA 400, HSQ V-250, BULLET350, BULLET500 , CONTINENTAL GT, DUKE125, RC125, DUKE200, RC200, DUKE250, RC390, DUKE390, ADV390, ADV250, HSQ S-250, |
Warranty (in months)* - Inclusive of Prorata
HFE12506T+
Previous
Next
- Tubular positive plate ensuring longer life over flat plate battery in deep discharge application.
- Highly puncture-resistant separators.
- Special alloy to eliminate antimony-poisoning resistance to avoid excessive water loss after a certain service life.
- Special paste recipe (expander carbon combination) to reduce charging time.
- Factory Charged & ready to fit / use.
- Minimal Self-discharge rate for longer shelf life.
- Higher Cold Cranking Strength.
- Vibration resistant robust design.
- I-CAT Approved.
- Meets the complete I-CAT approved e-rickshaw requirements.
- High charge retention & ability to perform well in PSoC conditions.
- Unprecedented performance, even in the most demanding conditions.
- Offers up to 2x the cycle life of a standard flat plate battery.
- High density plate oxide for maximum power-per-gram and dependable ‘high cycling’ service.
- 3.5% antimony terminal Lead and large through-partition connections, increases power output; increases durability, vibration resistance and longer your battery life.
- Complete ease and convenience of your journey on the road, our e-rickshaw batteries are reliable and long-lasting.
- High-density negative plate’s paste maximizes performance and optimizes your battery life.
- Enhanced life special alloy optimizes cycle life and maximizes performance of your battery.
- Special lead alloy positive grid maximizes conductivity and allows for low resistance.
- Robust Envelope Separator with puncture-resistant ribbed back, allows for optimum acid circulation and helps prevent shorts. Maximum acid circulation, helps the battery to remain cool, and extend battery life.
- Vent cap design that resists acid leakage.
- Precision manufactured ribbed case that is 100% Air pressure tested, helps avoid future leaks and adds strength and rigidity.
| Capacity: | 125Ah @ C20 |
| Technology: | Expander Tubular Plate |
| Supported: | E-Rickshaw |
| Nominal Voltage: | 12V |
| Dimension: | Length - 425mm |
| Width - 180mm | |
| Height - 300mm |
| Warranty (in months)* - Inclusive of Prorata | 06* months |
|---|---|
₹ 9900 ₹ 7920/-
inclusive of all taxes (20% discount)
Supported:
| 350 Classic, Fortytwo, NINJA 300, NINJA 400, HSQ V-250, BULLET350, BULLET500 , CONTINENTAL GT, DUKE125, RC125, DUKE200, RC200, DUKE250, RC390, DUKE390, ADV390, ADV250, HSQ S-250, |
HFE14009T+
Previous
Next
- Tubular positive plate ensuring longer life over flat plate battery in deep discharge application.
- Highly puncture-resistant separators.
- Special alloy to eliminate antimony-poisoning resistance to avoid excessive water loss after a certain service life.
- Special paste recipe (expander carbon combination) to reduce charging time.
- Factory Charged & ready to fit / use.
- Minimal Self-discharge rate for longer shelf life.
- Higher Cold Cranking Strength.
- Vibration resistant robust design.
- I-CAT Approved.
- Meets the complete I-CAT approved e-rickshaw requirements.
- High charge retention & ability to perform well in PSoC conditions.
- Unprecedented performance, even in the most demanding conditions.
- Offers up to 2x the cycle life of a standard flat plate battery.
- High density plate oxide for maximum power-per-gram and dependable ‘high cycling’ service.
- 3.5% antimony terminal Lead and large through-partition connections, increases power output; increases durability, vibration resistance and longer your battery life.
- Complete ease and convenience of your journey on the road, our e-rickshaw batteries are reliable and long-lasting.
- High-density negative plate’s paste maximizes performance and optimizes your battery life.
- Enhanced life special alloy optimizes cycle life and maximizes performance of your battery.
- Special lead alloy positive grid maximizes conductivity and allows for low resistance.
- Robust Envelope Separator with puncture-resistant ribbed back, allows for optimum acid circulation and helps prevent shorts. Maximum acid circulation, helps the battery to remain cool, and extend battery life.
- Vent cap design that resists acid leakage.
- Precision manufactured ribbed case that is 100% Air pressure tested, helps avoid future leaks and adds strength and rigidity.
| Capacity: | 140Ah @ C20 |
| Technology: | Expander Tubular Plate |
| Supported: | E-Rickshaw |
| Nominal Voltage: | 12V |
| Dimension: | Length - 425mm |
| Width - 180mm | |
| Height - 300mm |
| Warranty (in months)* - Inclusive of Prorata | 09 months |
|---|---|
₹ 11000 ₹ 8800/-
inclusive of all taxes (20% discount)
Supported:
| 350 Classic, Fortytwo, NINJA 300, NINJA 400, HSQ V-250, BULLET350, BULLET500 , CONTINENTAL GT, DUKE125, RC125, DUKE200, RC200, DUKE250, RC390, DUKE390, ADV390, ADV250, HSQ S-250, |
Warranty (in months)* - Inclusive of Prorata
HFE14009T+
Previous
Next
- Tubular positive plate ensuring longer life over flat plate battery in deep discharge application.
- Highly puncture-resistant separators.
- Special alloy to eliminate antimony-poisoning resistance to avoid excessive water loss after a certain service life.
- Special paste recipe (expander carbon combination) to reduce charging time.
- Factory Charged & ready to fit / use.
- Minimal Self-discharge rate for longer shelf life.
- Higher Cold Cranking Strength.
- Vibration resistant robust design.
- I-CAT Approved.
- Meets the complete I-CAT approved e-rickshaw requirements.
- High charge retention & ability to perform well in PSoC conditions.
- Unprecedented performance, even in the most demanding conditions.
- Offers up to 2x the cycle life of a standard flat plate battery.
- High density plate oxide for maximum power-per-gram and dependable ‘high cycling’ service.
- 3.5% antimony terminal Lead and large through-partition connections, increases power output; increases durability, vibration resistance and longer your battery life.
- Complete ease and convenience of your journey on the road, our e-rickshaw batteries are reliable and long-lasting.
- High-density negative plate’s paste maximizes performance and optimizes your battery life.
- Enhanced life special alloy optimizes cycle life and maximizes performance of your battery.
- Special lead alloy positive grid maximizes conductivity and allows for low resistance.
- Robust Envelope Separator with puncture-resistant ribbed back, allows for optimum acid circulation and helps prevent shorts. Maximum acid circulation, helps the battery to remain cool, and extend battery life.
- Vent cap design that resists acid leakage.
- Precision manufactured ribbed case that is 100% Air pressure tested, helps avoid future leaks and adds strength and rigidity.
| Capacity: | 140Ah @ C20 |
| Technology: | Expander Tubular Plate |
| Supported: | E-Rickshaw |
| Nominal Voltage: | 12V |
| Dimension: | Length - 425mm |
| Width - 180mm | |
| Height - 300mm |
| Warranty (in months)* - Inclusive of Prorata | 09 months |
|---|---|
₹ 11000 ₹ 8800/-
inclusive of all taxes (20% discount)
Supported:
| 350 Classic, Fortytwo, NINJA 300, NINJA 400, HSQ V-250, BULLET350, BULLET500 , CONTINENTAL GT, DUKE125, RC125, DUKE200, RC200, DUKE250, RC390, DUKE390, ADV390, ADV250, HSQ S-250, |
HFE15012T+
Previous
Next
- Tubular positive plate ensuring longer life over flat plate battery in deep discharge application.
- Highly puncture-resistant separators.
- Special alloy to eliminate antimony-poisoning resistance to avoid excessive water loss after a certain service life.
- Special paste recipe (expander carbon combination) to reduce charging time.
- Factory Charged & ready to fit / use.
- Minimal Self-discharge rate for longer shelf life.
- Higher Cold Cranking Strength.
- Vibration resistant robust design.
- I-CAT Approved.
- Meets the complete I-CAT approved e-rickshaw requirements.
- High charge retention & ability to perform well in PSoC conditions.
- Unprecedented performance, even in the most demanding conditions.
- Offers up to 2x the cycle life of a standard flat plate battery.
- High density plate oxide for maximum power-per-gram and dependable ‘high cycling’ service.
- 3.5% antimony terminal Lead and large through-partition connections, increases power output; increases durability, vibration resistance and longer your battery life.
- Complete ease and convenience of your journey on the road, our e-rickshaw batteries are reliable and long-lasting.
- High-density negative plate’s paste maximizes performance and optimizes your battery life.
- Enhanced life special alloy optimizes cycle life and maximizes performance of your battery.
- Special lead alloy positive grid maximizes conductivity and allows for low resistance.
- Robust Envelope Separator with puncture-resistant ribbed back, allows for optimum acid circulation and helps prevent shorts. Maximum acid circulation, helps the battery to remain cool, and extend battery life.
- Vent cap design that resists acid leakage.
- Precision manufactured ribbed case that is 100% Air pressure tested, helps avoid future leaks and adds strength and rigidity.
| Capacity: | 150 @ C20 |
| Technology: | Expander Tubular Plate |
| Supported: | E-Rickshaw |
| Nominal Voltage: | 12V |
| Dimension: | Length - 425mm |
| Width - 180mm | |
| Height - 300mm |
| Warranty (in months)* - Inclusive of Prorata | 12 months |
|---|---|
₹ 12500 ₹ 10000/-
inclusive of all taxes (20% discount)
Supported:
| 350 Classic, Fortytwo, NINJA 300, NINJA 400, HSQ V-250, BULLET350, BULLET500 , CONTINENTAL GT, DUKE125, RC125, DUKE200, RC200, DUKE250, RC390, DUKE390, ADV390, ADV250, HSQ S-250, |
Warranty (in months)* - Inclusive of Prorata
HFE15012T+
Previous
Next
- Tubular positive plate ensuring longer life over flat plate battery in deep discharge application.
- Highly puncture-resistant separators.
- Special alloy to eliminate antimony-poisoning resistance to avoid excessive water loss after a certain service life.
- Special paste recipe (expander carbon combination) to reduce charging time.
- Factory Charged & ready to fit / use.
- Minimal Self-discharge rate for longer shelf life.
- Higher Cold Cranking Strength.
- Vibration resistant robust design.
- I-CAT Approved.
- Meets the complete I-CAT approved e-rickshaw requirements.
- High charge retention & ability to perform well in PSoC conditions.
- Unprecedented performance, even in the most demanding conditions.
- Offers up to 2x the cycle life of a standard flat plate battery.
- High density plate oxide for maximum power-per-gram and dependable ‘high cycling’ service.
- 3.5% antimony terminal Lead and large through-partition connections, increases power output; increases durability, vibration resistance and longer your battery life.
- Complete ease and convenience of your journey on the road, our e-rickshaw batteries are reliable and long-lasting.
- High-density negative plate’s paste maximizes performance and optimizes your battery life.
- Enhanced life special alloy optimizes cycle life and maximizes performance of your battery.
- Special lead alloy positive grid maximizes conductivity and allows for low resistance.
- Robust Envelope Separator with puncture-resistant ribbed back, allows for optimum acid circulation and helps prevent shorts. Maximum acid circulation, helps the battery to remain cool, and extend battery life.
- Vent cap design that resists acid leakage.
- Precision manufactured ribbed case that is 100% Air pressure tested, helps avoid future leaks and adds strength and rigidity.
| Capacity: | 150 @ C20 |
| Technology: | Expander Tubular Plate |
| Supported: | E-Rickshaw |
| Nominal Voltage: | 12V |
| Dimension: | Length - 425mm |
| Width - 180mm | |
| Height - 300mm |
| Warranty (in months)* - Inclusive of Prorata | 12 months |
|---|---|
₹ 12500 ₹ 10000/-
inclusive of all taxes (20% discount)
Supported:
| 350 Classic, Fortytwo, NINJA 300, NINJA 400, HSQ V-250, BULLET350, BULLET500 , CONTINENTAL GT, DUKE125, RC125, DUKE200, RC200, DUKE250, RC390, DUKE390, ADV390, ADV250, HSQ S-250, |
